Direct Show

-

1

web-cams or AVI files

360 Vision IP Dome

20090317

1

MPEG4

ACM-1011

ACM-1100 Series

ACM-1230 Series

ACM-1310 Series

ACM-1430 Series

ACM-1511

ACM-3001

ACM-3011

ACM-3100 Series

ACM-3210 Series

ACM-3300 Series

ACM-3400 Series

ACM-3511

ACM-3601

ACM-3701

ACM-4000 Series

ACM-4100 Series

ACM-4200 Series

ACM-5001

ACM- 5600 Series

ACM- 5711

ACM- 5801

ACM-7400 Series

ACM-7511

ACM-8100 Series

ACM-8200 Series

ACM-8201

ACM-8211

ACM-8511

C

YES

C

YES

C

YES

C

YES

C

YES

C

YES

C

YES

TCM-1231

V4.06.09

1 / 1
(VMD)²

TCM-1511

V4.06.09

1 / 1
(VMD)²

TCM-3011

TCM-4201

TCM-5001

TCM-5601

TCM-7011

TMU-9501

TMU-9611

TMU-9811

TMU-9911

5500

V2.05.01, V2.05.12, V2.06.12, V2.08.11

6630

^*Only one channel or quad view can be monitored at the same time.
^#PTZ only supports cameras using Pelco-P, Pelco-D and Dynacolor protocol.
Type 3 PTZ Preset Support is only available in the NetDVMS 6.0 or higher version.
² No motion events available in JPEG

Adam 6050^#

1.27

0

Adam 6060^#

1.21

Adam 6066^#

1.04

AgileMesh 100

NO-2.3.1b- 4M-M

1

JPEG

VideoEdge Dome^{^}

1.44

1

JPEG/MPEG4

VideoEdge IP Box Camera ^{^}

LC-7224 series

1.23, 1.31

1

JPEG /MPEG4

-

0/ 0(VMD)

Yes

One-Way

AV 1300, 2100, 3100

64327, 64328

C

1

JPEG

Yes

1/ 1 (VMD)

-

-

-

-

-

-

AV 1305

AV 1310

AV1315

AV1325

AV 1355

AV 2105

AV 2110

C

YES

C

YES

AV 2155

AV 2805

AV2815

AV2825

AV3100

AV 3105

AV 3110

C

Yes

C

Yes

AV 3130

64329

AV 3135

AV 3155

AV 5100

64327, 64328

AV 5105

AV 5110

C

Yes

AV 5155

AV 8180*

65010

65031

AV8185DN

C

YES

AV 8360*

65010

AV8365DN

C

YES

65031

65147, 65148, 65197

AV10115DN

C

YES

AV20185DN

C

YES

211M

211W

215/215-E

216MFD

242S IV ^@

M1054

M1103

M1104

M1113

M1114

M3113-R

C

M3114-R

C

Yes

M3203

M3204

C

C

Yes

P3346

P3346-E

C

Y

C

Y

C

Y

C

Y

P5532-E

C

Yes

C

Yes

VS

• A = Audio Events are supported
• B = Boot Events are supported
• Ta = Tampering Events are supported
• Te = Temperature Events are supported
• V = Video Loss Events are supported
• P = Pre-Alarm support
• AV = Requires enabling AreaView and defining areas on device homepage

In many cases the latest supported firmware from Axis is needed to use this functionality.

YES

YES

YES

YES

YES

YES

YES

YES

YES

YES

YES

YES

YES

YES

Autodome Easy II IP

YES

YES

Dinion NWC-0455- 10P

Dinion NWC-0495-10P

FlexiDome NWD-0455

FlexiDome NWD-0455

FlexiDome NWD-0495

Extreme NEI-828

NBC-200 series

NBN-498-11P

VideoJet X10

VideoJet X20

VideoJet X40

VIP X1

VIP X2

VIP X1600 M4SA^^^^

VIP X1600 XFM4^^^^

C

Yes

C

Yes

C

Yes

C

Yes

VG4 Series^^^

C

Yes

IP200B

NetSVR-1

NetSVR-6

4CIF support is only available with the ProSight SMB, NetDVR and NetDVMS 6.0 versions or later.
^&Requires H.263 support. Only supported PTZ Protocol is Pelco-D or Pelco-P.
*Use Arecont Vision Cameras Driver
** Device is added as 4 modules with 4 channels each.
*** Using ONVIF Conformant device. ONVIF will not work through a NAT router. Version 1.01 and 1.02 supported.
^{^} H.264 support requires firmware version 43500400 or 1950000410
^^ Via ONVIF Conformant driver. Tested by camera manufacturer.
^^^Hardware ID F0002Exx not supported.
^^^^Device is added as 4 modules with 4 channels each. Support for PTZ camera using Bosch, Pelco-P, Pelco-D or Panasonic CS850 protocol. Only 1 Input per module can be setup at any given time for PTZ control. Only support for 1 Audio channel per module.

3.0.1.2, 3.0.6.28

JPEG
MPEG4
H.264

3.0.1.2, 3.0.6.28

JPEG
MPEG4
H.264

3.0.1.2, 3.0.6.27

JPEG
MPEG4
H.264

3.0.1.2, 3.0.6.27

JPEG
MPEG4
H.264

3.0.1.2, 3.0.6.27

JPEG
MPEG4
H.264

3.0.1.2, 3.0.6.26

JPEG
MPEG4
H.264

3.0.1.2, 3.0.6.28

JPEG
MPEG4
H.264

3.0.1.2, 3.0.6.28

JPEG
MPEG4
H.264

3.0.1.2

JPEG
MPEG4

3.0.1.2, 3.0.6.27

JPEG
MPEG4
H.264

WFB-100Ap*

YES

YES

YES

IPC - 4300*

IPC - 4500*